Classic Inlines Performance Parts

Save $15.00
The DUI Ignition Kit, includes the DUI Distributor, Custom LiveWire set, and the Billet Wire Looms. Please designate cap color, wire color, and loom color when ordering.

Fits: The 5/16" drive fits all 200/250ci motors, as well as the late 170ci. It will not fit the 144ci or early 170ci, which used a 1/4" drive.

Add Horse Power by installing the most powerful ignition system available for the small six and save an additional $20 by ordering the complete DUI Ignition Kit. The Complete Kit includes the DUI Distributor, a custom LiveWire set, and the Billet Aluminum Wire Looms.

Dyno testing on a 200ci engine showed an increase up to 15 HP over the Duraspark II and MSD Ignition system, and up to 20 HP over the stock ignition system. Manufactured by Performance Distributors for Classic Inlines, the DUI distributor is the only one-piece, high performance ignition system available for your inline six. Since the coil and ignition module are self-contained in the distributor, it is truely a clean and simple drop in installation, which eliminates all of the messy and confussing wiring associated with other ignition systems. Just run one 12-volt hot wire to the distributor and you're ready to run! A tach hook-up is also included for those who like to keep track of their RPMs.

This Street/Strip DUI Distributor is built with a 50,000 volt coil that allows a whopping .055" plug gap, which provides a more powerful explosion of the fuel mixture. The Dyna Module is designed with more electronic dwell time as well, producing an even hotter spark. Unlike stock Ford systems, and many aftermarket systems, no ballast resistor is required, which reduces the voltage in the ignition system. The D.U.I. allows FULL voltage providing a better spark and more power. Every DUI Distributor is custom curved on a machine prior to packaging. This results in a super smooth curve, eliminate engine damaging detonation, and provides instant throttle response.

Caps are available in Black, Red, or Blue.

Our DUI LiveWire Sets are custom fit for use with our DUI Performance Distributors - no assembly is required. Each wire is numbered on both ends making installation, removal and re-installation quick and easy.

LiveWires® from Performance Distributors, have a space age heat resistant sleeving which is non-flammable and non-corrosive to chemicals. This unique sleeving provides protection from -76° to +1400° F and offers excellent resistance to moisture and chemicals. The LiveWire spiral wound core prevents electronic interference, radio noise, and computer interference. They offer an extremely low resistance of 300 - 350 Ohms per foot, for optimum spark travel. Each LiveWires has a durable and long lasting silicone jacket, with heat shrink applied between the boot and the sleeving to keep dirt and moisture away from wire terminals. Due to the unique protective sleeving on LiveWire set, stock or aftermarket looms will not fit over the wires. Custom Livewire sets are available in Black, Red, Blue, and Yellow.

DUI Billet Aluminum Wire Looms are custom manufactured for use on the LiveWire sets. Due to the protective sleeving on LiveWires, stock or aftermarket looms will not fit over LiveWire sets without pinching or crimpimg the wires. These billet separators are held together with allen head screws which are mounted flush within the loom, will not pinch or damage the protective heat sleeving. Available in a natural finish or Black anodized (red, blue, and gold anodized are no longer offered). Set includes 1-4 Hole. 1-3 Hole. and 3-2 Hole Looms.

All parts required for installation are included with the complete kit, saving you time and frustration, and un-necessary trips to your auto parts store. The DUI Dstributor is a real work of craftsmanship, and although it is uniquely designed, replacement parts are easy to find. High Energy Ignition (HEI) replacement parts, available at all auto parts stores, fit right on the DUI distributor. While a stock HEI moduals work in a pinch, the custom DUI moduals are available from Classic Inlines, as are the caps, rotors, and coils. Please designate cap color, and wire color when ordering.

NOTE: We highly recommend reading our Tech Article on "Preventing Premature Distributor Gear Failures" before you install your new distributor.

NOTE: While the DUI distributor will fit Econline trucks and vans, you must cut a small hole in the side of the doghouse and fashion some sort of bowl like cover to make room for the larger DUI distributor.

DUI verse DSII - note that the DUI is considerably
larger than a stock distributor or the Duraspark II

NOTE: The DUI distributor will not fit with a standard power steering pump due to the additional height and width of the DUI distributor. Classic Inlines is working on a custom bracket to allow the use of the newer Saginaw Power Steering pump, which will clear.