home | tech | search | checkout | contact | email | forum   

 

 

 

 

 

 

 

 




Classic Inlines
603 W Pecos Ave
Mesa, AZ 85210
(602) 708-6650
9am-5pm (PST)
Monday-Friday
INTERNET-PHONE SALES ONLY

NO WALK-INS

Sorry We don't have a store front







 

Home » Ford 144-170-200-250 » Ignition System » All Products

Checkout

DUI-EFI Performance Distributor
Product ID: DUI-200-EFI
DUI-EFI Performance Distributor

Details 

Add Horse Power by installing the most powerful ignition system available for the small six. This distributor is similar to our DUI Distributor, however it has been modified for EFI/TBI applications. See Details for more information.

NOTE: Price includes the EFI Distributor and wire harness. LiveWires and billet wire looms sold separately (see below).

Shaft Size:
Cap Color:
Price: $450.00

Classic Inlines HEI Ignition Kit
Product ID: HEI-200-CIK
Classic Inlines HEI Ignition Kit

Details 

Save $10.00
Classic Inlines HEI Ignition Kit includes our HEI Distributor, a set of Custom DUI LiveWires and the DUI Billet Wire Looms. Please designate cap color, wire color, and loom color when ordering.
See Details for more information.

Fits: The 5/16" drive fits all 200/250ci motors, as well as the late 170ci. It will not fit the 144ci or early 170ci, which used a 1/4" drive.

Not sure which distributor or ignition system best suits your needs?
Then you need to check out our tech article on
Ignition Systems.

NOTE:
Before you install your new distributor, we recommend reading our tech article on
Preventing Premature Distributor Gear Wear.

NOTE: The DUI distributor will not fit with a standard power steering pump due to the additional height and width of the DUI distributor. Classic Inlines is working on a custom bracket to allow the use of the newer Saginaw Power Steering pump, which will clear.


Cap Color:
Wire Color:
Loom Color:
Price: $325.00

Duraspark II Ignition Kit
Product ID: FSP-200-DSII-K
Duraspark II Ignition Kit

Details 

Save $10.00
 
This ignition kit comes with a single vacuum Duraspark II Distributor (see options), the Dyna Ignition Module, Inferno Coil, and a Gold Ballast Resistor (spark plug wires sold separately). Please designate shaft size and distributor choice when ordering. Your favorite after market spark plug wires can be used, or you can use our DSII Livewires, which are available in black, blue, red, and yellow (sold separately). The kit includes all required wiring and easy to follow instructions.
See DETAILS for more info. 

This distributor WILL NOT fit the 144ci or early 170ci with a 1/4" drive.
For 1/4" drives, please see the DUI Ignition systems.

Not sure which distributor or ignition system best suits your needs?
Then you need to check out our tech article on
Ignition Systems
 
NOTE: Before you install your new distributor, we recommend reading our tech article on
Preventing Premature Distributor Gear Wear.

Coil Type:
Distributor:
Price: $240.00

DUI Complete Ignition Kit
Product ID: DUI-200-CIK
DUI Complete Ignition Kit

Details 

Save $10.00
The DUI Ignition Kit includes the DUI Distributor, a set of Custom LiveWires and Billet Wire Looms. Please  designate cap color, wire color, and loom color when ordering. 
See Details for more information.

Fits: The 5/16" drive fits all 200/250ci motors, as well as the late 170ci. It will not fit  the 144ci or early 170ci, which used a 1/4" drive.

Not sure which distributor or ignition system best suits your needs?
Then you need to check out our tech article on
Ignition Systems.

NOTE:
Before you install your new distributor, we recommend reading our tech article on Preventing Premature Distributor Gear Wear.

NOTE: The DUI distributor will not fit with a standard power steering pump due to the additional height and width of the DUI distributor. Classic Inlines is working on a custom bracket to allow the use of the newer Saginaw Power Steering pump, which will clear. 

Cap Color:
Wire Color:
Loom Color:
Price: $495.00

Classic Inlines HEI Distributor Only
Product ID: HEI-200-DZY
Classic Inlines HEI Distributor Only

Details 

Classic Inlines HEI Distributor comes with a high output module, 65,ooo volt coil, a high quality cap (brass terminals), hardened gear, and an adjustable vacuum can.

Requires only one 12V hot wire for hookup. Distributor Only (does not includes wires or looms). See
Details for more information.

Fits: The 5/16" drive fits all 200/250ci motors, as well as the late 170ci. It will not fit the 144ci or early 170ci, which used a 1/4" drive.

Not sure which distributor or ignition system best suits your needs?
Then you need to check out our tech article on
Ignition Systems.

NOTE:
Before you install your new distributor, we recommend reading our tech article on
Preventing Premature Distributor Gear Wear.

NOTE: The HEI Distributor will not fit with a standard power steering pump due to the additional height and width of the DUI distributor. Classic Inlines is working on a custom bracket to allow the use of the newer Saginaw Power Steering pump, which will clear.


Cap Color:
Price: $195.00

Duraspark II Distributor - Standard
Product ID: ALC-200-DSII-S
Duraspark II Distributor - Standard

Details 

Rebuilt by Autoline - this single vacuum distributor comes complete with the distributor cap and rotor, and the cap adaptor. That's right, the cap adaptor is included. Fits all 170/200/250ci with 5/16" hex drive. See DETAILS for more information.

This distributor WILL NOT fit the 144ci or early 170ci with a 1/4" drive.
For 1/4" drives, please see the DUI Ignition systems.

Not sure which distributor or ignition system best suits your needs?
Then you need to check out our tech article on
 
Ignition Systems

NOTE: Before you install your new distributor, we recommend reading our tech article on Preventing Premature Distributor Gear Wear.

Price: $75.00

Duraspark II Distributor - Performance
Product ID: DUI-200-DSII-P
Duraspark II Distributor - Performance

Details 

Rebuilt by Performance Distributors, these high performance distributors incorporate a custom full length bronze bushing to increase stability and durability, there-by eliminating top end timing fluctuations and spark scatter at higher rpm's. Includes a single vacuum distributor, distributor cap, the cap adaptor and the rotor. Fits all 170/200/250ci with 5/16" hex drive. See DETAILS for more information. 

This distributor WILL NOT fit the 144ci or early 170ci with a 1/4" drive.
For 1/4" drives, please see the DUI Ignition systems.

Not sure which distributor or ignition system best suits your needs?
Then you need to check out our tech article on
Ignition Systems.

N
OTE: Before you install your new distributor, we recommend reading our tech article on Preventing Premature Distributor Gear Wear.

Price: $260.00

DUI Performance Distributor
Product ID: DUI-200-DZY
DUI Performance Distributor

Details 

Add Horse Power by installing the most powerful ignition system available for the small six. Dyno testing on a 200ci engine showed an increase up to 15 HP over the Duraspark II and MSD ignition system, and up to 20 HP over the stock ignition system. Requires only one 12V hot wire for hookup. Distributor Only (does not includes wires or looms). See Details for more information.

Fits: The 5/16" drive fits all 200/250ci motors, as well as the late 170ci. It will not fit the 144ci or early 170ci, which used a 1/4" drive.

Not sure which distributor or ignition system best suits your needs?
Then you need to check out our tech article on
Ignition Systems.

NOTE:
Before you install your new distributor, we recommend reading our tech article on Preventing Premature Distributor Gear Wear.

NOTE: The DUI distributor will not fit with a standard power steering pump due to the additional height and width of the DUI distributor. Classic Inlines is working on a custom bracket to allow the use of the newer Saginaw Power Steering pump, which will clear. 

Cap Color:
Price: $365.00

DUI Mini-VIP Voltage Booster
Product ID: DUI-200-VIP
DUI Mini-VIP Voltage Booster

Details 

The new Mini-VIP steps up the charging systems normall 12-14 volts to a whopping 18 volts, which is sent directly to your DUI Ignition System. This has several advantages over the normal 12-14 volts. See Details for more information.

The Mini-VIP is for use with DUI Ignition Systems only. It is NOT intended for spark boxes or ignition systems that draw 6 or more amps.

Price: $240.00

DUI Rev Limiter
Product ID: DUI-200-REV
DUI Rev Limiter

Details 

Protect your engine from over revving with the DUI Rev Limiter, which includes plug-in modules for 6000, 7000 and 8000 rpm's (additional modules available - see options). This unit works great with our DUI Ignition Systems. See Details for more information.

RPM Modules:
Price: $145.00

DSII Dyna Ignition Module (only)
Product ID: DSI-200-MOD
DSII Dyna Ignition Module (only)

Details 

The DSII Dyna Ignition Module works with any Duraspark II distributor, including the Duraspark II distributor or any rebuilt aftermarket distributor, providing reliable "seat of the pants" performance for both street and strip applications.  While we recommend using the DSII Inferno Coil (sold separately or in a kit), the Dyna Module can be used with any aftermarket coil. Includes easy to follow instructions. See DETAILS for more information.

Price: $120.00

DSII Dyna Module and Inferno Coil Kit
Product ID: DSI-200-IGN
DSII Dyna Module and Inferno Coil Kit

Details 

The Dyna Ignition Moduel and Inferno Coil kit is suitable for all applications, ranging from street use to all out racing, and can be used wth any Duraspark II Distributor. The intense spark allows the plug gaps to be opened up to .050-055", providing serious firepower up to 6500rpm. The kit includes the ignition box, coil, required wiring, and easy to follow instructions. See DETAILS for more information.

Coil Type:
Price: $175.00

« Previous | 1 | 2 | Next »



Below are links to most of our parts, however for a full index of the items we stock, please use the "Product" pop out menus which are located to the left. Thanks for stopping by
Classic Inlines Newest Products
To see the 10 latest additions to our product line, check out our New Products
Product Quick-Links

Red Links: In Stock
Green Links: Coming Soon

Cylinder Head and Valve Train Components
 
 
 
Cylinder Heads
 
Hyd Camshafts
 
Solid Camshafts
 
Lifters
     
 
 
 
 
Valves
 
Pushrods
 
Valve Springs
 
Timing Chains
     
 
 
 
Rocker Assemblies
 
Alloy Valve Cover
 
Chrome Valve Cover
 
Oil & Breather Caps


Carburetion and Induction Components

 
 
 
Autolite Carbs
 
Weber Carbs
 
Adaptors
 
Spacers/Insulators
 
Remote Induction - Large Kit
 
AirTex Mechanical Fuel Pump
 
Redline/Weber Manual Choke Cable
Air Cleaners
 
Cold Air Induction
 
Pumps & Regulators
 
Miscellaneous


Ignition Systems and Components
DUI Ignition
 
Duraspark Ignition
 
Ignition Modules
 
Ignition Coils


Headers, Exhaust Kits, and Components
 
 
 
Headers
 
Exhaust Kits
 
Header Bolts & Studs
 
Stainless Bolt Kits


Short Block Components
 
 
 
Oil Pumps
 
Oil Pans & Filters
 
Balancers
 
Motor mounts
 
 
 
 
Pistons & rings
 
Bearings
 
ARP bolts & studs
 
Gaskets


Engine Dress-Up Components
Chrome Valve Cover Kit
 
 
 
Chrome Parts
 
Billet Parts
 
Alloy Parts
 
Stainless Steel
 


Miscellaneous

Tools & Equipment
Falcon Handbook
Magazines
Hats & Shirts
   

 

Login Status  Login Status

Not logged in

» Login

 


home ] [ index ] [ products ] [ search ] [ checkout ]

Copyright 2012 - Classic Inlines - All Rights Reserved